Bathroom Cleaning Checklist for NZ Homes (Step by Step)

Clean a bathroom from top to bottom. Spray the shower, tiles and basin and let the product work, wipe mirrors and fittings, scrub the toilet, then rinse and mop the floor last. Do the basics weekly and scrub limescale and grout every one to two weeks. Ventilate after every shower to slow mould and damp.

By PureNest Cleaning · Published 7 November 2026 · Last updated 7 November 2026

Clean white bathroom vanity with a spray bottle, scrubbing brush and green towels, titled Bathroom Cleaning Checklist for NZ Homes

What should you clean in a bathroom, in what order?

  1. Remove items from the shower, bath and vanity
  2. Spray the shower, bath, tiles and basin and let the product sit
  3. Clean the mirror, taps and fittings
  4. Scrub the toilet bowl, then the seat, lid and base
  5. Scrub the shower, glass and plughole, then rinse
  6. Empty the bin and wash the bath mat
  7. Mop the floor last, from the far corner towards the door
PureNest cleaner wiping a bathroom basin, with the seven bathroom cleaning steps shown in order from clearing the shower to mopping the floor

Bathroom cleaning checklist

AreaWhat to doHow often
ToiletClean bowl, seat, lid, base and handleWeekly
Shower and bathScrub walls, glass, taps and plugholeEvery 1 to 2 weeks
Basin and vanityWipe basin, taps, bench and mirrorWeekly
Tiles and groutScrub grout lines and wipe tilesEvery 1 to 2 weeks
Extractor fan coverRemove dust and wipeMonthly
Bath mat, towels, shower curtainWashWeekly to monthly
FloorVacuum or sweep, then mopWeekly
Cabinet interiorWipe shelves and clear old productsEvery few months
Bathroom cleaning frequency checklist: toilet, basin and floor weekly, shower and grout every one to two weeks, fan cover monthly, cabinets every few months

How do you remove limescale?

  • Apply a limescale remover or white vinegar to glass, taps and tiles
  • Leave it for the time on the product label
  • Scrub with a non-scratch pad, rinse well and dry
  • Test a small area first, and avoid vinegar on natural stone
  • Repeat for heavy build-up, as it may take more than one go
Shower glass before and after limescale removal, with four steps: apply remover or vinegar, wait, scrub with a non-scratch pad, rinse and dry

How do you clean grout?

  • Brush away loose dirt with a dry brush
  • Apply a grout cleaner or a baking soda paste
  • Scrub along the grout lines with a stiff brush
  • Rinse and dry, then repeat if stains remain
  • Wipe walls after showers to slow grout staining
Stained grout before and clean white grout after, with four steps: dry brush, grout cleaner or baking soda paste, scrub the lines, rinse and dry

How do you deal with mould spots?

  • Ventilate: run the extractor fan or open a window after showers
  • Wipe wet surfaces and dry the shower glass
  • Clean mould spots early with a suitable cleaner and a cloth
  • Wash shower curtains and bath mats regularly
  • If mould keeps returning or covers a large area, get further advice about the cause
Bathroom corner with mould spots before and clean after, next to an extractor fan, with tips to ventilate, wipe wet surfaces and clean mould early

What mistakes should you avoid?

  • Mixing products. Never mix bleach with ammonia or acids.
  • Skipping contact time. Cleaners need a few minutes to work.
  • Using scratchy pads on glass or fittings. They leave marks.
  • Mopping first. Floors go last, so dirt does not fall onto them.
  • Forgetting ventilation. Damp air is what mould needs.
Five bathroom cleaning mistakes to avoid: mixing products, skipping contact time, scratchy pads, mopping first and forgetting ventilation

When should you call a professional?

A professional deep clean suits heavy limescale, stained grout, a bathroom that has not been cleaned in months, or a move-in or move-out. A PureNest deep clean includes limescale and grout treatment in all bathrooms, plus the oven, fridge and cabinets. See the deep cleaning page for what is included.

How much does a bathroom-focused deep clean cost in Auckland?

Property sizeDeep clean (incl. GST)Standard clean (incl. GST)
Studio apartment$345.00$224.25
1 bedroom$471.50$304.75
2 bedroom$621.00$402.50

Prices are 2026 rates. A fixed written quote follows a free on-site inspection, so your price is confirmed before work starts.

Tired of scrubbing? Request a free inspection, or see deep cleaning in Auckland and the 2026 rate card.

Keeping on top of it between deep cleans? A regular house cleaning plan covers the bathroom every visit.

Related reading: Deep clean vs regular clean, Spring cleaning checklist for NZ homes and How often should you clean your house?

Questions

Bathroom cleaning FAQs

Wipe surfaces and clean the toilet weekly, and scrub the shower, tiles and grout every one to two weeks. A deeper clean for limescale and grout once or twice a year suits most homes.

Apply a limescale remover or white vinegar to the glass and taps, leave it for the time on the label, then scrub and rinse. Test a small area first, and avoid vinegar on natural stone.

Apply a grout cleaner or a baking soda paste, scrub with a stiff brush, then rinse and dry. Dirty or stained grout may need repeat treatment.

Ventilate after showers by running the extractor fan or opening a window, wipe wet surfaces, and clean mould spots early with a suitable cleaner. Heavy or recurring mould may need further advice.

No. Never mix bleach with other cleaners, especially ammonia or acids such as vinegar, because they can release harmful fumes. Use one product at a time and rinse between them.

PureNest deep cleans start from $345.00 incl. GST for a studio and $621.00 for a 2 bedroom home (2026 rates), and include limescale and grout treatment in all bathrooms. A fixed written quote follows a free on-site inspection.

Want a hand? Book a free inspection

Request your free on-site inspection or call +64 22 088 9959 (Mon–Fri, 8am–6pm).